双模随机交错晶场中最近邻弱交换相互作用对重入现象的影响

利用有效场理论研究了双模随机交错晶场中混合自旋 Blume-Capel 模型纳米管系统的重入现象, 发现了系统的重入现象与晶场取值概率、 晶场强度和外壳层与内壳层格点间最近邻交换相互作用的关系. 结果表明: 取值概率、 交换相互作用、 晶场强度和温度等诸多因素相互竞争, 使系统表现出丰富的磁化现象: 正( 负) 晶场较弱时, 系统只发生二级相变; 随着正( 负) 晶场增强, 系统的二级相变消失, 呈现一级相变; 一定条件下, 系统会出现重入现象.     

Stochastic and upscaled analytical modeling of fines migration in porous media induced by low-salinity water injection

Fines migration induced by injection of low-salinity water(LSW) into porous media can lead to severe pore plugging and consequent permeability reduction. The deepbed filtration(DBF) theory is used to model the aforementioned phenomenon, which allows us to predict the effluent concentration history and the distribution profile of entrapped particles. However, the previous models fail to consider the movement of the waterflood front. In this study, we derive a stochastic model for fines migration during LSW flooding, in which the Rankine-Hugoniot condition is used to calculate the concentration of detached particles behind and ahead of the moving water front. A downscaling procedure is developed to determine the evolution of pore-size distribution from the exact solution of a large-scale equation system. To validate the proposed model,the obtained exact solutions are used to treat the laboratory data of LSW flooding in artificial soil-packed columns. The tuning results show that the proposed model yields a considerably higher value of the coefficient of determination, compared with the previous models, indicating that the new model can successfully capture the effect of the moving water front on fines migration and precisely match the effluent history of the detached particles.     

An improved depth-averaged nonhydrostatic shallow water model with quadratic pressure approximation

Phase-resolved information is necessary for many coastal wave problems, for example, for the wave conditions in the vicinity of harbor structures. Two-dimensional (2D) depth-averaging shallow water models are commonly used to obtain a phase-resolved solution near the coast. These models are in general more computationally effective compared with computational fluid dynamics software and will be even more capable if equipped with a parallelized code. In the current article, a 2D wave model solving the depth-averaged continuity equation and the Euler equations is implemented in the open-source hydrodynamic code REEF3D. The model is based on a nonhydrostatic extension and a quadratic vertical pressure profile assumption, which provides a better approximation of the frequency dispersion. It is the first model of its kind to employ high-order discretization schemes and to be fully parallelized following the domain decomposition strategy. Wave generation and absorption are achieved with a relaxation method. The simulations of nonlinear long wave propagations and transformations over nonconstant bathymetries are presented. The results are compared with benchmark wave propagation cases. A large-scale wave propagation simulation over realistic irregular topography is shown to demonstrate the model's capability of solving operational large-scale problems.     

AgAlSe2晶体高压相变的第一性原理研究

基于密度泛函理论,采用广义梯度近似法,研究了黄铜矿结构AgAlSe₂在高压下的晶体结构、晶格动力学稳定性与电子结构.结果显示:在0 GPa时AgAlSe₂的晶格参数与实验值吻合,在13.9 GPa附近,质量密度、Se-Ag键长、Se-Al键长、晶格常数a突然增大,相对晶胞体积V/V₀、晶格常数c突然减小,声子谱出现虚频,结构变得不稳定,带隙发生突变,数值呈减小趋势.表明AgAlSe₂晶体在13.9 GPa附近发生结构相变.该研究为AgAlSe₂晶体在理论上所能承受的高压提供信息支撑.     

Geometrical methods for analyzing the optimal management of tipping point dynamics

Natural resources are not infinitely resilient and should not be modeled as being such. Finitely resilient resources feature tipping points and history dependence. This paper provides a didactical discussion of mathematical methods that are needed to understand the optimal management of such resources: viscosity solutions of Hamilton–Jacobi–Bellman equations, the costate equation and the associated canonical equations, exact root counting, and geometrical methods to analyze the geometry of the invariant manifolds of the canonical equations. Recommendations for Resource Managers

• Management of natural resources has to take into account the possible breakdown of resilience and induced regime shifts.
• Depending on the characteristics of the resource and on its present and future economic importance, either for all initial states the same kind of management policy is optimal, or the type of the optimal management policy depends on the initial state.
• Modeling should reflect the finiteness of the data.

     

Exact solution of the two-mode quantum Rabi model

An analytical method is developed to study the two-mode quantum Rabi model. For certain specific parameter conditions, especially for the resonant conditions, we obtain an infinite number of the exact solutions of the eigenfunctions and associated energies. It is shown that there exist new types of the exact energies which do not correspond to the level-crossings. Our analytical method may find applications in some related models.     

超声动载荷下三维随机骨料混凝土的损伤

混凝土是一种由粗骨料与水泥砂浆组成的非均质复合材料。本研究利用APDL语言程序编写三维水泥混凝土骨料随机投放程序并导入ABAQUS中,同时赋予各相材料塑性损伤本构关系来研究混凝土动态加载下的破坏规律,运用超声波在混凝土破碎中的作用机理对混凝土动态损伤破坏过程进行模拟研究。结果表明:随着超声动态载荷的增大,粗骨料体积分数为40%的混凝土始终能够承受最大应力载荷;随着超声应力波幅值增大,混凝土在动载荷下的损伤值逐渐增大,且粗骨料体积分数为40%时,其抗损伤能力最优;当粗骨料最大粒径逐渐增大,或者当粗骨料最小粒径增大,混凝土级配不合理导致性能不稳定,更易损伤破坏。     

基于八面体理论的岩石循环加-卸载本构模型及修正

探究岩石的受力特点及破坏特性是研究岩石地下工程安全性的关键,诸多学者都期望能在岩石本构模型的研究上取得突破性进展。在此背景下,提出了一种能够描述循环加-卸载条件下岩石的本构模型。首先,假设岩石的微元强度服从八面体剪应力理论并且微元破坏服从Weibull概率公式,将岩石本构中的损伤变量以及岩石微元强度表达式里包含的损伤因子进行本构变换,得到关于应力、应变等其他表现加-卸载下岩石损伤本构模型的参数,表示出岩石微元强度和损伤变量,再将得到的岩石微元强度和损伤变量代入所提出的岩石本构模型中,并进行等式变换得到一个函数表达式。通过将其与实验数据进行拟合对比分析,得出修正后的拟合参数,将其代入函数式中,得到损伤本构模型的修正式。最后将拟合参数进行必要的敏感性分析,得出各拟合参数的实际物理意义。     

EicC对撞光学设计

EicC是中国科学院近代物理研究所计划建造的中国电子-离子对撞机装置,该对撞机质心能位于20 GeV附近,是研究海夸克的最佳能量窗口,同时还可研究胶子和价夸克。EicC对撞粒子为高极化率质子和电子束团,质子环pRing采用八字环设计方案,可以更好地保持极化质子束团极化率,电子环eRing采用跑道形环设计方案,可以更好地利用隧道空间。该装置电子束流能量中心值为3.5 GeV,电子束RMS发射度为水平方向60 nm·rad,垂直方向60 nm·rad,对撞点b函数为水平方向0.4 m,垂直方向0.12 m;质子束流能量中心值20 GeV,质子束RMS发射度为水平方向300 nm·rad,垂直方向180 nm·rad,对撞点b函数为水平方向0.08 m,垂直方向0.04 m,设计亮度2×1033 cm–2s–1。EicC采用双对撞区非对称光学设计,通过对EicC不同色品补偿方案的研究,最终确定了弧区加短直线节共同补偿的色品补偿方案;通过研究对撞点处b函数以及对撞点间相移对动力学孔径的影响,最终得到pRing动力学孔径大于8 s(s为束团RMS尺寸)、eRing动力学孔径大于20 s,满足大于束团尺寸6 s的要求。